| Supply voltage: | 12 V - 24 V AC +/-10% ; 12 V - 30 V DC +/-10% (to be operated from SELV compatible power supplies only) | |
| Power consumption: | < 2.5 W | |
| Mounting height: | 2 m to 3.5 m (local regulations may have an impact on the acceptable mounting height) | |
| Temperature range: | -25°C to +55°C; 0-95% relative humidity, non condensing | |
| Degree of protection: | IP54 | |
| Noise: | < 70 dB | |
| Expected lifetime: | 20 years | |
| Detection mode: | Motion Min. detection speed: 5 cm/s | Presence Typical response time: < 200 ms (max. 500 ms) |
| Technology: | Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2 | Active infrared with background analysis Spot: 5 cm x 5 cm (typ) Number of spots: max. 24 per curtain Number of curtains: 2 |
| Output: | IXIO-DT1 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC IXIO-DT3 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC In switching mode: NO/NC In frequency mode: pulsed signal (f= 100 Hz +/- 10%) Galvanically isolated current source No detection: current source ON Open circuit voltage: 6.5 V Output voltage available at 10 mA: 3 V min. Typical load: up to 3 optocouplers in series Detection: current source OFF Open-circuit remained voltage: < 500 mV | IXIO-DT3/-DT1 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC Holdtime: 0.3 to 1 s |
| Test input: | IXIO-DT3/-DT1 Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms | |
| Norm conformity: | This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information. | |
The IXIO-D is a sensor which combines radar technology for the activation of the door and infrared technology for the user protection. The unidirectional radar enables energy savings to be made. The three-dimensional infrared curtain protects people from any contact with the doors. Thanks to the LCD screen and the BEA DECODER app sensor configuration has never been easier.
Energy-saving
Due to the unidirectionality, the duration of the door opening cycle is shorter, which reduces heat loss from the building and saves energy. This also optimises the “airlock” function.
Intuitive configuration
Intuitive configuration with an LCD screen displaying texts and symbols (LCD graphics). Quick & easy overview of all settings via the BEA decoder app.
Visual aids
4 red spotlights visible on the floor to adjust the angle of the failsafe curtain.
Stable & reliable
A 32-bit microprocessor optimises the processing of information coming from the environment, ensuring a stable performance throughout the year. 48 high-density infrared spotlights from 2 curtains protect users from any contact with the doors.
IXIO-DT1
sensor with external monitoring
IXIO-DT3
sensor with external monitoring for emergency exits
BEA REMOTE CONTROL
Universal remote control for the adjustments of BEA sensors.
SPOTFINDER
Tool for visualising the exact position of infrared curtains.
IXIO SMART DAISY CHAIN HUB
Hub for smart daisy chain connection of IXIO
IXIO CA
Ceiling accessory for the IXIO range
IXIO/VIO RA
Rain accessory for the IXIO & VIO range
IXIO/VIO/4SAFE INTERFACE
Interface for the IXIO/VIO/4SAFE
IXIO-D/VIO BA
Bracket Accessory for the IXIO-D & VIO range
IXIO-D/VIO-D CDA
Curved door accessory for the IXIO-D & VIO-D range
MULTI-SENSOR HUB
Hub for daisy chain connection of 4SAFE & IXIO