Insight Automation Ltd - Special Applications

Need Some Brochures?
Click here to request brochures delivered straight to your office.

Home > Categories > Special Applications

DOD By Ditec S.p.A

Versatile, compact and full of accessories
The physical conformation of the Dod system integrates it perfectly with a vast range of accessories that enable it to be tailored to the most widely varying
operating needs. The compact structure and modest size of the structure enables it to be installed even in small and narrow spaces.

Possibility of different applications

Fitted aligned on sectional doors
Fitted with pinion and crown on sectional doors
Fitted on sliding doors
Fitted on sliding doors with chain transmission

Easy installation
Keyed on driving shaft or featuring pinion and chain transmission, making other moving parts superfluous.
Small and compact dimensions: for easy application even in constricted spaces
Adjustabe rotating Limit-switch unit compete with three limit switches
Three release devices: Cable, Crank or Key

Downloads

Technical Information

	DOD 12	DOD 14	DOD 15
Electromechanical Actuator	for sectional and sliding doors	for sectional and sliding doors	for sectional and sliding doors
Derived models	DOD 12B	DOD 14B	DOD 15B
Type of use	HEAVY	HEAVY	HEAVY
Intermittent operation	S2 = 30min S3 = 50%	S2 = 30min S3 = 50%	S2 = 30min S3 = 50%
Power supply	230V~ 50Hz	230V~ 50Hz	400V~ 50Hz
Insulation class	class 1	class 1	class 1
Input	3A	3A	1.2A
Torque / Thrust	45Nm	60Nm	65Nm
Protection rating	IP 54	IP 54	IP 54
Dimensions	135 x 264 x 350	135 x 264 x 350	135 x 264 x 350
Control panel	E1F LOGIC A21F	E1F LOGIC A21F	LOGIC TF

Technical Images

DOR By Ditec S.p.A

For folding doors up to 1.5 + 1.5 m wide

The vast range of DITEC products and automatic systems enables any pre-existing opening and entrance to be automated to meet any company needs. All the models have been designed to ensure easy installation on structures of any size or weight and they have been designed for any type of use.

Dor is an external actuating arm system for folding doors with articulated leaves. It has been specifically engineered to actuate folding doors with two articulated leaves, up to 1.5 + 1.5 mt long: mounted on one leaf only it ensures opening and closing by means of a simple telescopic arm. Positioned over the door leaves, it ensures smooth opening and closing. It is fitted with a remote lock release system which always ensures manual operation, if needed, in case of power failure. Dor lB automation is fitted with a lock release system with cord.

Downloads

Technical Information

	DOR 1B	DOR 1BH	DOR 1BHS
Electromechanical Actuator	for folding doors	for folding doors	for folding doors
Type of use	FREQUENT	HEAVY	HEAVY
Intermittent operation	S2 = 15min S3 = 25%	S2 = 30min S3 = 50%	S2 = 30min S3 = 50%
Power supply	230V~ 50Hz	24V=	24V=
Insulation class	class 1	class 3	class 3
Input	1.3A	12A	12A
Torque / Thrust	300Nm	300Nm	300Nm
Protection rating	IP 44	IP 44	IP 55
Dimensions	400 x 120 x 107	400 x 120 x 107	400 x 120 x 107
Control panel	E1F LOGIC A21F E2 LOGIC A22	VIVA H	VIVA H

Technical Images

OVER By Ditec S.p.A

Maximum capacity 600 Kg (1 wing), 800 Kg (2 wings).

LOGIC HE control panel gives Over great efficiency.
It incorporates all the functions required to ensure remarkable operation in any circumstance, such as: automatic closing, step-by-step operation, stop safety during opening/closing, reverse safety, "hold-to-run" movement, speed and power adjustment and emergency batteries in case of a power break.
If the door is especially heavy, an Over 30 double motor can be fitted, or else an Over 60 to increase capacity and ensure easier movement.

The Over automatic system is a multipurpose automatic system for heavy-duty straight sliding doors with slide guide powered by a drive belt.

Management of stroke and limit switch with encoder that automatically slows down movement at end of stroke.
Very long leaves can be opened and closed automatically.
Silent running
Carriages with wheels in nylon or steel for greater durability.
Tough guide-support brackets.
Wide range of accessories.
An elegant and practical telescopic guard in profiled aluminium that can be adjusted to match the dimensions and thickness of the automatic system.

Downloads

Technical Information

Technical Images

ONDA By Ditec S.p.A

Automation for curved sliding doors

Reliable, quick and easy to install, ONDA comes complete with high performance accessories such as the new ultrasound safety sensors fitted on the transit opening. Safe and high performance, these automations are perfectly suited for both residential and commercial buildings.

Proven and reliable, new generation components
May be used with DITEC PAM 35 profiles or with generic wings
Very quiet operation ensured by runners made of a special mix of self-cleaning and self-lubricating materials
TÜV certified
Max. automation curve angle 180°
Automation with closed arch supporting structure, easy to fix to the entrance door without using any strengthening structures
Easy to maintain by means of the covering, which may be opened by means of hinges and easy-to-reach components

Supply options

automation only with single or dual moving wing
automation + PAM 35 frame without glass
automation + PAM 35 frame + curved glass 44.2 (4+4+PVB 0.76 mm).

Downloads

Technical Information

VOLO By Ditec S.p.A

Reduced height automation for curved wing sliding doors

Designing commercial buildings with high-tech frontages is widely becoming more popular.
Automatic doors must conform to both quality and aesthetic requirements to seamlessly blend into high-tech buildings.
Volo is the new, reduced-height DITEC automation for curved sliding automatic doors, specifically designed to fulfil modern architectural requirements.
With Volo, architects and designers can design “ad hoc” curved automatic doors to fully and effectively integrate the project in the existing building.
The elegance of the curved wing, together with DITEC automation quiet and smooth operation, give the entrance a touch of elegance and quality.
Hotels, restaurants, companies and prestigious buildings are the perfect applications for this top quality automation.

Height of automatic system: only 10 cm or 18 cm with strengtheners
Available with two mobile leaves with or without fixed leaves.
Tested and reliable components already applied to the Bis and Ten DITEC automatic systems.
Can be combined with both the Pam 30 DITEC profiles and general leaves.
Drive belts and nylon trolleys are used for leaf movement.
2-motor overflow automatic system for escape routes.
TÜV approval pending
Angle of curved automatic system 240° max.

Downloads

Technical Information

	VOLO
Capacity	6 - continuous 160Kg (2 wings)
Duty class	5 - very heavy
Intermittent operation	S3 = 100%
Power supply	230V~ 50/60Hz
Input	1A
Max. opening speed	0.8m/s (1 wing) 1.6m/s (2 wings)
Max. closing speed	0.8m/s (1 wing) 1.6m/s (2 wings)
Protection rating	IP 20 IP 24 (with cover)
Dimensions	300 x 180 x L
Standard radius	min. 900 - max. 2000 mm
Max usable radius	20 m
Max usable angle	240°
Automation arc	min. 2000 - max. 6000 mm
Standard net height	2200 mm
Max net height	2700 mm

EXEO By Ditec S.p.A

Exeo, the expression of art in movement

Banks, hotels, prestigious and representative offices require elegant and refined entrances, well integrated in the structural style of the building.
To cater for this need, DITEC has created an absolutely extraordinary product.
Clean and elegant lines, a harmonic design and cutting-edge technology are its distinguishing features.
A solid and compact structure, featuring very refined safety systems, turns silently, accompanying guests in a courteous and graceful way.

Exeo is a line of doors with circular structure, with internal revolving wings, available in manual or automatic version, with identical structural part.
The wings in manual version are push-operated while in the automatic version, operation is by means of a gear motor located in the top part of the structure.

Available door diameters are:

1800 mm - 2000 mm - 2200 mm - 2400 mm
2600 mm - 2800 mm - 3000 mm - 3200 mm
3400 mm - 3600 mm - 3800 mm - 4000 mm

Standard heights are:

of access opening 2200 mm,
of roof 190 mm,
total 2390 mm.

The basic version, both manual and automatic, features:

3 or 4 wings
5+5 mm curved outer glass panels
4+4 mm wing glass panels
standard RAL colour finish or in anodised aluminium.

The automatic basic version, besides the features of the manual version, also has 2 anti-shearing sensors.
The door consists of three fundamental structures:

one fixed supporting structure,
one moving structure,
one upper part.

The fixed supporting structure is made using aluminium profiles of the DITEC Pam 35 series, with curvature that varies according to the required diameters.
The curved glazing is made of unbreakable glass (5+5 mm) with 0.75 mm PVB.
The structure is fastened to the floor by means of special anchors.
The moving structure consists of a central coated-steel supporting unit fastened rigidly to the floor.
The 3 or 4 wings, fastened to the central support, are made of Pam 35 aluminium profile and 4+4 mm unbreakable glass with 0.38 mm PVB.
They are made so that, in case of accidental breakage of a glass panel, this can be very easily replaced.

Downloads

Technical Images

Showing 1 to 6 of 6 (1 Pages)